btw for those who have pod gauges can i use the same inverter as my reverse indiglos to light up all the gauges just plug it in the extra connectors????
Last edited by tru_Asiatik_Pride; Jan 27, 2004 2:24pm.
yes you can plug those into the wire that is on your AC speedo gauges...so then the colors can be converted together and be the same...
hey bro do i need to use these when i intall it in the reverse ind. inverter or do i plug it directly???
shit...um...
...I think you would have to wire that one also...since the red and black are power and ground and the little black thing who knows what...i don't have mine connected to my speedo gauges because those extra plugs were cut off...
yeah bro i tested them and i plugged it directly and they work so i dunno
then you probably don't need it...
ohhhhhhhhhhhhhhhh wait! i got it...lol
that extra part plugs right into the back of the gauge and is for lighting it...but if you have it connected to the converter...you don't need to since the power for lighting is coming from the gauges...see i used it in mine since I didn't do that and had to connect the black and red for power...
yeah bro i tested them and i plugged it directly and they work so i dunno
then you probably don't need it...
ohhhhhhhhhhhhhhhh wait! i got it...lol
that extra part plugs right into the back of the gauge and is for lighting it...but if you have it connected to the converter...you don't need to since the power for lighting is coming from the gauges...see i used it in mine since I didn't do that and had to connect the black and red for power...
ic ic so i dont need them then rite? so its kool to use one inverter for all of em. would it overload the inverter or is it all good? soory for all the question ur the only person i know who has similar gauges
yeah bro i tested them and i plugged it directly and they work so i dunno
then you probably don't need it...
ohhhhhhhhhhhhhhhh wait! i got it...lol
that extra part plugs right into the back of the gauge and is for lighting it...but if you have it connected to the converter...you don't need to since the power for lighting is coming from the gauges...see i used it in mine since I didn't do that and had to connect the black and red for power...
ic ic so i dont need them then rite? so its kool to use one inverter for all of em. would it overload the inverter or is it all good? soory for all the question ur the only person i know who has similar gauges
nah, it's fine... they wouldn't put all those plugs on there for no reason...or if they knew it would overload at a certain number...
nah, it's fine... they wouldn't put all those plugs on there for no reason...or if they knew it would overload at a certain number...
ok last 2 questions can i ground all of them in one place or should i ground it in diffrent places and did you connect your volt gauge(redwire) directly to the battery or can i use the same 12v source for all of them below is an example pic how i wired my rev indiglos(last fuseap on the right)
my 12v source was a wire I tested that was connected to something...i have no idea what it was working, but it was a 12V source and was right under the dash...
same for lighting mine up, I had to find an illumination wire on one of the wires under the dash, but you don't have to worry about that...
and yes you can ground them in the same location, I did that for both of mine...power and ground are in same location
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.