mine does the same thing. just take out your gauge console (see any gauges/LED install in the Interior Installs section) and pull the needle out a tiny bit. Do this by prying with 2 spoons from opposite sides of the needle (put cloth underneath so you don't scuff the gauges). Mine does the same thing. Try not to POP off the needle or you will have to follow annoying process of starting car and putting needle back on at 0 mph. Just shimmy it out a tiny bit.
no mine does not get stuck it just doesnt move until i hit 2000rpm meaning if i cruise in first gear below 2000rpm the needle does not go up(i would guess iam running below 10mph) and was wondering if that normal, i dunno how else to expalin it