$20 at pep boys. cant beat em. i wired up two toggle switches under the window lock button that have little LEDs that light up when you turn them on. total cost was about $100. 2x$20 for neon tubes, 2x$12 for strobes, $10 for inlinefuse holder, $8 for 25 feet of wires. took me about 3 days to do. very easy job, hardest part is gettin the wires through the firewall. make sure if you do this you get the inline fuse holder (mine is one from Rockford Fosgate so thats why its expensive), if you dont use one of these when you hook everything up and accedentaly touch the ground and powre wires you can fry ur neons. i burnt out my first fuse by this and trust me its very easy to do if ur not careful. just follow the directions from the install section. thats what i did.