WEll Im doing the gauges and stereo...so will I need LED's or resistors? Also...do you have the LED size? Once again thanx for your help
Hey, I realize that you live in STL like me, and I was out looking for these this weekend, and Radio Shack does not have the right kind of LED's you are looking for. You need surface mount LED's, and they don't carry those. I went to the one in Crestwood Mall, Kirkwood, and South County Mall, and nothing. I did buy a 40 watt soldering iron, a desoldering bulb, and some solder though, because you will have to solder the old LED's off and solder the new ones back on, except for the two in the ac console.
I have never soldered before, so I have been practicing on old computer parts to get the hang of it. I am going to do the radio first because it is under warranty and then move to bigger and better things. Offhand, I believe the LED size is 1206, but I could be wrong.
Here is a link to a post going into a little more detail about the LED's. https://www.celicahobby.com/ubbthreads/thread.f_1862404191_0_collapsed_5__1.html
You might also want to take a look at the installation process in the install section to see if you can handle it, but I'm sure you might be able to unless you are a moron like me.