Previous Thread
Next Thread
New Reply
Print Thread
Joined: Sep 2003
Posts: 94
Striker
Member
Striker Nov 26, 4:26am - #63094 

Member
2003 Toyota Celica GT

Joined: Sep 2003
Posts: 94
Canada
VARAD ALIEN SCANNER INSTALL?

Anyone know how to go about installing one of these bad boys on the windshield?

[Linked Image]
[Exterior Color <font color=gray> - ex. Red, Blue, Orange</font>:"blue"]2003 GT[/Exterior Color <font color=gray> - ex. Red, Blue, Orange</font>]
Joined: Nov 2003
Posts: 33
pinoyesv6
Member
pinoyesv6 Nov 26, 1:08pm - #63095 
Member
2000 Mitsubishi Galant ES V6

Joined: Nov 2003
Posts: 33
Maryland
install is pretty easy. IMO. it should come with like some double sided tape that you put on the scanner and either hte windshield or the rear view Mirror, or wherever you want it. from there, you take the wires and run it up to the headliner. run it across the windshield and down the a-pillar. then you'll have 3 wires. you can ground the ground wires to any good ground you want. then the power wire, i'd connect to one of the fuses on the fuse box that gets a constant supply of power. the battery is another option. then for the 3rd wire. i think its yellow. correct me if im wrong. that connects to your alarm. if you don't have an alarm, connect it to something that turns off when the car shuts off. one example of this is the cigarette lighter.
Join the conversation - Register now or Sign in to add your comment


Moderated by  isaac 

Customize Your Toyota CelicaPrivacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2016