Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

#58295 Nov 5, 6:25pm
Joined: Oct 2003
Posts: 18
Member
2000 Toyota Celica SS2 VVTLi
Member
2000 Toyota Celica SS2 VVTLi
Joined: Oct 2003
Posts: 18
Turbos have timers, vtech has controllers but is there such thing as a VVTLi controllers? I mean Vtec and VVTLi is the same thing isnt it? Would it a vtec controller be compatible with the vvtli? It would be great if we could drop our revs down to 3 or 4 to start feeling the lift!

Joined: Aug 2003
Posts: 343
Member
2002 Toyota Celica
Member
2002 Toyota Celica
Joined: Aug 2003
Posts: 343
Originally Posted by Kody
Turbos have timers, vtech has controllers but is there such thing as a VVTLi controllers? I mean Vtec and VVTLi is the same thing isnt it? Would it a vtec controller be compatible with the vvtli? It would be great if we could drop our revs down to 3 or 4 to start feeling the lift!

Uh, no.


[Linked Image]
Airman First Class

Joined: Sep 2002
Posts: 209
Member
2002 Toyota Celica
Member
2002 Toyota Celica
Joined: Sep 2002
Posts: 209
i posted the same question a few months ago. people say that the reason there are vtec controllers is because people have cracked the honda computer codes. perhaps honda gave out the codes or something but no one has "cracked" the toyota computer yet. until we do this, we cant alter the settings on wheh lift kicks in. it would be soo cool if we could drop it to like 4000 tho right? i bet it would knock half a second or more from our 1/4 time.

Joined: Oct 2003
Posts: 2,029
Likes: 1
Masta OC
2003 Toyota Celica
Masta OC
2003 Toyota Celica
Joined: Oct 2003
Posts: 2,029
Likes: 1
I refuse to believe there isn't some reason that lift is set to kick in so high in our cars. If Toyota could safely make the car lift from 2k without ANY modification to the engine, why wouldn't they do it? It wouldn't cost them anything and they would have a car that runs 1/4s in the 14s probably.

Gotta be a reliability/feasibility problem there.



I'm just a crosshair
I'm just a shot away from you

Joined: Jan 2003
Posts: 1,576
Likes: 1
Specialist
2003 Toyota Celica GT
Specialist
2003 Toyota Celica GT
Joined: Jan 2003
Posts: 1,576
Likes: 1
Wasn't there a device coming out soon that would allow you to adjust VVTL-i? I thought someone mentioned the name a while back.

Joined: May 2003
Posts: 203
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: May 2003
Posts: 203
Originally Posted by RevMonster
I refuse to believe there isn't some reason that lift is set to kick in so high in our cars. If Toyota could safely make the car lift from 2k without ANY modification to the engine, why wouldn't they do it? It wouldn't cost them anything and they would have a car that runs 1/4s in the 14s probably.

Gotta be a reliability/feasibility problem there.

The car run's 14's now. you mean 13s?

Joined: May 2003
Posts: 2,449
Specialist
2003 Toyota Celica
Specialist
2003 Toyota Celica
Joined: May 2003
Posts: 2,449
Originally Posted by Mike00
Originally Posted by RevMonster
I refuse to believe there isn't some reason that lift is set to kick in so high in our cars. If Toyota could safely make the car lift from 2k without ANY modification to the engine, why wouldn't they do it? It wouldn't cost them anything and they would have a car that runs 1/4s in the 14s probably.

Gotta be a reliability/feasibility problem there.

The car run's 14's now. you mean 13s?
maybe into the 12's like the lotus elise


I am a HID Maniac!!

Joined: Oct 2003
Posts: 2,029
Likes: 1
Masta OC
2003 Toyota Celica
Masta OC
2003 Toyota Celica
Joined: Oct 2003
Posts: 2,029
Likes: 1
I don't think the stock GTS runs in the low 14s, does it?

Dunno, I only see modded-out ones. In any case, my point is that I don't think there is an easy way to put in a chip and change the powerband. Lotus spent a ton of money tweaking the engine to make it 190hp with more low-end torque, it took more than just changing the computer settings.


I'm just a crosshair
I'm just a shot away from you

Joined: Sep 2002
Posts: 188
Member
Member
Joined: Sep 2002
Posts: 188
please run a search.


[Linked Image]

Joined: Sep 2003
Posts: 170
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 170
Originally Posted by RevMonster
I refuse to believe there isn't some reason that lift is set to kick in so high in our cars. If Toyota could safely make the car lift from 2k without ANY modification to the engine, why wouldn't they do it? It wouldn't cost them anything and they would have a car that runs 1/4s in the 14s probably.

Gotta be a reliability/feasibility problem there.

You are right, there is a reason that Toyota put the lift so high. The reason that lift is set at 6k is because it doesn't make more power than the first cam at lower RPM's. If you lowered the 2nd cam engaugement point to 5,500 rpm or lower, instead of getting a more linear power band, or getting more power earlier, you will instead get a big power loss when lift kicks in. The car would bog down.

Originally Posted by Stephen
Wasn't there a device coming out soon that would allow you to adjust VVTL-i? I thought someone mentioned the name a while back.

No one have been able to crack the factory ECU to modify the lift engaugement. The only device that allows you to adjust VVTL-i is the Apexi Power FC. Like I mentioned above, lowering the RPM that lift kicks in results in a power loss instead of a gain. A member of NC.org (M-Spec) lowered the lift to 5,500 RPM with the Power FC when he was tuning his car and had dyno proven power loss because of it. Instead of lowering the lift engaugement to try and stay in the power band, he ended up raising the fuel cut off point so he could rev higher.

Joined: Jul 2003
Posts: 22
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Jul 2003
Posts: 22
Or someone just has to bless us with reprofiled cams.

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
Originally Posted by chameleon
Originally Posted by RevMonster
I refuse to believe there isn't some reason that lift is set to kick in so high in our cars. If Toyota could safely make the car lift from 2k without ANY modification to the engine, why wouldn't they do it? It wouldn't cost them anything and they would have a car that runs 1/4s in the 14s probably.

Gotta be a reliability/feasibility problem there.

You are right, there is a reason that Toyota put the lift so high. The reason that lift is set at 6k is because it doesn't make more power than the first cam at lower RPM's. If you lowered the 2nd cam engaugement point to 5,500 rpm or lower, instead of getting a more linear power band, or getting more power earlier, you will instead get a big power loss when lift kicks in. The car would bog down.

Originally Posted by Stephen
Wasn't there a device coming out soon that would allow you to adjust VVTL-i? I thought someone mentioned the name a while back.

No one have been able to crack the factory ECU to modify the lift engaugement. The only device that allows you to adjust VVTL-i is the Apexi Power FC. Like I mentioned above, lowering the RPM that lift kicks in results in a power loss instead of a gain. A member of NC.org (M-Spec) lowered the lift to 5,500 RPM with the Power FC when he was tuning his car and had dyno proven power loss because of it. Instead of lowering the lift engaugement to try and stay in the power band, he ended up raising the fuel cut off point so he could rev higher.
But from reving higher, you run the risk of blowing your engine, right? If so, it's not worth the consequences if you ask me.

Last edited by slidr; Nov 6, 2003 9:56pm.

Aqua Teen Hunger Force...number one in the hood, G
Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
Street Prototype
Street Prototype
2002 Toyota Celica GT
Guam, U.S.A.

Posts: 2,154
Joined: January 2003
Thank you.: Props to EverythingCelica.com for having the most informative facts for Celica Enthusiasts and having the best features that you can never find on any other Celica websites.
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)