here is the amp i'mma push it to
Rockford Fosgate Power T10001bd
> 500 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
> 1000 watts RMS x 1 at 1 ohm (1-ohm stable)
> frequency response 20-250 Hz
> Class bd technology
> CEA-2006 compliant
> requires 1/0-gauge power and ground leads wiring and hardware not included with amplifier
> variable low-pass filter (32-250 Hz, 24 dB/octave)
> Para-Punch bass EQ (0-18 dB with variable center frequency between 35-70 Hz) with wired remote control
> MOSFET power supplies and outputs
> MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability.
> TOPAZ noise-killing differential inputs eliminate 80% of ground loop noise between the head unit and the amp.
> TRANS-ana circuitry keeps preamp signal clean
> NOMAD advanced protection circuitry monitors temperature, voltage, current and impedence, and provides "intelligent" shut-down protection without limiting system performance.
> fan cooled
> preamp outputs for easy connection to a second amplifier
> bd Sync terminal for connection to a second bd amplifier, to drive a common load
> fuse rating: 150A x 1
> dimensions: 17-15/16"W x 2-11/16"H x 12-3/4"D
> warranty: 2 years