Here's what i did few years back with my GT wheel before I changed it. This is an actual TRD
part. The metalic red TRD
logo is embedded between the thick glossy face so the logo will never get scratched or erased. You'd probably have to gashed it 5mm deep before you can even damage it. Sticks right on top of your factory Toyota horn logo. It's not as expensive as the actual TRD
horn replacement that some people have done with the TRD
forward slashed logo.
horn button requires you to peel off the logo it is very time consuming and challenging if you don't take your time. This ones just a stick on very simple mod. Fixes the gashes like you have now or if you have an indent on your horn button logo.