Im reading an install guide from another website for disabling my auto on lights at night. I looked at the fuse box under my dash to find the "yellow wire with green stripe" and found about 3 or four yellow wires
. One has no stripe at all, and two have dark stripes. In this picture from the other website, I cant tell if the arrow is pointing to the general fuse box, or to a specific wire to cut. Ill copy and paste the short install guide and picture for you to see. Thanks.
ACTUAL INSTALL GUIDE:
This is a really easy mod to do. All you have to do is remove your shift boot, and ashtray, etc. Get the the fuse box, and unplug the harness that is on the lower right side of this picture. Once you have it unplugged, you will want to cut wire #17. This wire is Yellowish with a green stripe. You will want to cut it about a inch or two away from the harness connector, so you can reattach it if you sell the car, etc. Once you cut the wire, tape both ends off with electrical tape, and put everything back together.
Now the picture which I was questioning above..