Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
minor project...took me most of the day to do today. I had a ton of condensation in my passenger side headlight that was freezing and caused my low beam to blow and it just looked ugly..see pic
1953404025-headlightsgrill 001 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
so then i decided i should take both out and clean them...and paint the insides, as well as put on a mesh grill to replace the toyota one...and the lack of the one on the bottom...
1953404027-headlightsgrill 002 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
bumper off...
1953404028-headlightsgrill 003 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
baking in the oven...
1953404029-headlightsgrill 004 (2).jpg

Last edited by sbocaj55; Dec 28, 2004 3:55pm.

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
taken apart...
1953404031-headlightsgrill 005 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
painted and reassembled...
1953404034-headlightsgrill 009 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
and with grill...
1953404037-headlightsgrill 006 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
another shot..
1953404038-headlightsgrill 010 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
and last one...what do you guys think?
1953404039-headlightsgrill 007 (2).jpg

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
I still need to buy clear corners, chromium turn signals, new high beams, lows, and fogs...that will be later

Joined: Sep 2004
Posts: 895
Senior Member
2004 Toyota Celica
Senior Member
2004 Toyota Celica
Joined: Sep 2004
Posts: 895
sweet...turned real-ee clean thumbsup


Originally posted by A_Bathing_Ape:
I hit, what else, oh plus dome.

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
thanks...the best part was i got it done before my parents got home...so instead of them coming home and saying "WHAT THE HELL ARE YOU DOING YOU'RE GONNA FUCK SOMETHING UP" they just said..."so, what did you do today?" ha ha ha ha.

Joined: Aug 2003
Posts: 2,869
daman
2000 Toyota Celica GT
daman
2000 Toyota Celica GT
Joined: Aug 2003
Posts: 2,869
i like it! good work

Joined: Jul 2002
Posts: 10,110
05 WRB
2005 Subaru WRX STi
05 WRB
2005 Subaru WRX STi
Joined: Jul 2002
Posts: 10,110
that loooks REALLY good now...good job


SUBARU TECNICA INTERNATIONAL

Joined: Feb 2003
Posts: 1,408
Specialist
2000 Toyota Celica GT
Specialist
2000 Toyota Celica GT
Joined: Feb 2003
Posts: 1,408
Originally Posted by sbocaj55
thanks...the best part was i got it done before my parents got home...so instead of them coming home and saying "WHAT THE HELL ARE YOU DOING YOU'RE GONNA FUCK SOMETHING UP" they just said..."so, what did you do today?" ha ha ha ha.

i love that, i hate when they come home and yell... expecially about the car, when they dont even help me pay for it, ha ha screw that

Joined: Apr 2004
Posts: 802
Senior Member
2004 Toyota Celica GT
Senior Member
2004 Toyota Celica GT
Joined: Apr 2004
Posts: 802
What color did you use. It looks kinda metallic. thumbsup


Originally posted by RICOGT:
i wanted to get the vac gauge because it constantly moves. more of a race feel i think

Joined: Dec 2004
Posts: 317
Member
Member
Joined: Dec 2004
Posts: 317
ooo,pretty pretty! thumbsup

Joined: Aug 2003
Posts: 4,265
TheFilipinoCrew
2000 Toyota Celica GT
TheFilipinoCrew
2000 Toyota Celica GT
Joined: Aug 2003
Posts: 4,265
looks great. how hard was it to remove the front bumper

Joined: Aug 2004
Posts: 1,029
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,029
nice thumbsup


[Linked Image]

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
I used graphite color. It's spray paint made by duplicolor and it's made for painting rims...there's a pic of a wheel on the can and it's made for metal and plastic...it turned out really good and i think it would look killer with any color car.

The bumper removal was really easy. I've never done any sort of car work whatsoever before i bought my celica...and it didn't take long at all. It's honestly as hard to undo the plastic clips for the engine plastics as it is to unbolt the bumper. It's all very straightforward and easy to do. Timing from the time i pulled my car into the garage...i would say it takes maybe...30-40 mins to take the bumper off? something like that i suppose. For me anyway...I don't think it's beyond ANYONE'S skill level.

Joined: Dec 2004
Posts: 278
Member
2001 Toyota Celica
Member
2001 Toyota Celica
Joined: Dec 2004
Posts: 278
Niccce thumbsup I likey

Joined: Sep 2002
Posts: 141
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Sep 2002
Posts: 141
Did you use black mesh?
If so how does that black mesh look on silver?

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
The mesh well...I was hoping to buy some off of ebay for $10...but i wanted it done today so i ran to autozone and found some from APC...(it was $35 but i figured i saved waiting 2 weeks for the auction to end and shipping...) It was chrome colored which i decided was too ricey, so i used the same graphite colored paint i used for my headlights and painted the diamond mesh with that. I think it looks better than what black would...but i think the black would look fine too.

Joined: Jan 2003
Posts: 189
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Jan 2003
Posts: 189
Wow, nice job.
That's is going to be my next project here shortly, when I get some time off from work. lol I need a vacation. smile


{Live each day, like it's your last day on earth} <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

Joined: Aug 2004
Posts: 918
Senior Member
2000 Toyota Celica
Senior Member
2000 Toyota Celica
Joined: Aug 2004
Posts: 918
thumbsup cool looks really clean

Joined: Feb 2004
Posts: 121
Member
2001 Toyota Celica GT
Member
2001 Toyota Celica GT
Joined: Feb 2004
Posts: 121
How long did you put it in the oven? and what paint did you used?

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
I heated up the oven to 300 degrees and put em in for 15 minutes exactly. I was afraid at first so i tried 275 degrees for 15 mins but that didn't work. It's very important that you turn off the oven right before you put them in. This way it's really easy to just pry em apart with help from a friend and a butterknife (worked better than a screwdriver for me).

The paint i used was DupliColor high performance wheel coating or something to that effect...graphite color. I needed three coats to get good enough coverage.

Joined: Feb 2004
Posts: 121
Member
2001 Toyota Celica GT
Member
2001 Toyota Celica GT
Joined: Feb 2004
Posts: 121
Nice info, thumbsup, and finally what glue did you used for put them back?

Joined: May 2004
Posts: 655
Likes: 1
Senior Member
2000 Toyota Celica GT
Senior Member
2000 Toyota Celica GT
Joined: May 2004
Posts: 655
Likes: 1
now all you need is a grill on the front bumper. looks nice.

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
"now all you need is a grill on the front bumper. looks nice."
---I just put one in spineyes

A lot of guys say you can just use the epoxy that is already sealing them together, and that will be enough, but i bought some clear silicone sealer at walmart for like $3. You'll find it where they sell caulking and that sort of stuff. It doesn't shrink and it's watertight and pretty all-purpose...so i just laid a thin line of that around the seal on each one before heating them up and squeezing them together.

Joined: Nov 2004
Posts: 124
Member
2000 Toyota Celica GT
Member
2000 Toyota Celica GT
Joined: Nov 2004
Posts: 124
that's hot man, impressive for only one day's workthumbsup thumbsup thumbsup


chow mein is the staple of life

Joined: Nov 2004
Posts: 124
Member
2000 Toyota Celica GT
Member
2000 Toyota Celica GT
Joined: Nov 2004
Posts: 124
Originally Posted by sbocaj55
thanks...the best part was i got it done before my parents got home...so instead of them coming home and saying "WHAT THE HELL ARE YOU DOING YOU'RE GONNA FUCK SOMETHING UP" they just said..."so, what did you do today?" ha ha ha ha.

i love how my parents still say that even though they need me to help them fix their cars when something goes wrong rofl rofl rofl


chow mein is the staple of life

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
Originally Posted by Barrett18
Originally Posted by sbocaj55
thanks...the best part was i got it done before my parents got home...so instead of them coming home and saying "WHAT THE HELL ARE YOU DOING YOU'RE GONNA FUCK SOMETHING UP" they just said..."so, what did you do today?" ha ha ha ha.

i love how my parents still say that even though they need me to help them fix their cars when something goes wrong rofl rofl rofl

yeah honestly...a week after i bought my celi i wanted to put on my TRD exhaust...and they were afraid so they wanted me to take it to a shop to have it done. I think it's just parents that honestly don't know anythin about it...so they are afraid that you'll screw up something that you worked so hard for. They don't always realize it's a good way to learn stuff and everything. They were actually sorta proud of me or whatever that i did that which was weird...but...well as long as they don't see you doing it it's good in my experience...lol

Joined: Feb 2004
Posts: 121
Member
2001 Toyota Celica GT
Member
2001 Toyota Celica GT
Joined: Feb 2004
Posts: 121
1953405413-rodi_1823_110679989.gif

Joined: Sep 2003
Posts: 3,977
Furi Kuri
2002 Toyota Celica GT
Furi Kuri
2002 Toyota Celica GT
Joined: Sep 2003
Posts: 3,977
that looks hott thumbsup


I've mastered the art of the After Image Technique.

Joined: Mar 2004
Posts: 1,185
Pimpin aint easy
03 Toyota Celica GT
Pimpin aint easy
03 Toyota Celica GT
Joined: Mar 2004
Posts: 1,185
that looks hardcore. i hope i wont have to do that

Joined: Jun 2003
Posts: 1,353
Specialist
2004 Toyota Celica GT
Specialist
2004 Toyota Celica GT
Joined: Jun 2003
Posts: 1,353
great job man thumbsup

Joined: Nov 2004
Posts: 28
Member
2000 Toyota Celica GT
Member
2000 Toyota Celica GT
Joined: Nov 2004
Posts: 28
Excellent work, I will need to do that as well.

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
Originally Posted by carlosredtrd

yes that is the paint...

BTW thanks for the props guys! I have to give credit to robare on here...I used his suggestion for temperature, time, and type of paint...very cool and helpful guy wave

Last edited by sbocaj55; Dec 29, 2004 6:12pm.

Joined: May 2004
Posts: 2,971
Boobie Vision
2000 Toyota Celica
Boobie Vision
2000 Toyota Celica
Joined: May 2004
Posts: 2,971
so when you resealed the head lights. Did you throw them back in the oven so to seal them correctly??

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
yeah well if you can picture it one side of the headlight is shaped sorta like a "U" and the other side is like an "I" or something so it seals...i put a line of silicon in the bottom of the "U"...then pressed them together but they still needed to be pushed another 3/4" or so...so i heated them up for 8:30 at 300 degrees (again turning the oven off right when i put them in). Then i just had a friend squeeze them together while i screwed in the 3 screws holding it together...and it sealed up pretty cleanly.

Oh yeah and wear gloves...it gets pretty hot..lol

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
another pic in the daytime..
1953408039-headlightsgrill 030.jpg

Joined: Jun 2004
Posts: 3,744
CF Connoisseur
2004 Toyota Celica
CF Connoisseur
2004 Toyota Celica
Joined: Jun 2004
Posts: 3,744
asome. great job. love the painted ones. also nice little install guide smile

Joined: Aug 2004
Posts: 1,546
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Aug 2004
Posts: 1,546
thanks man...yeah i love the painted style too...i think it's sooo much better than any overlay or cover...but then again you do the work for it. The widebody orange and Carbon Fiber celica has the headlights painted like this too...and man it goes well with carbon fiber... thumbsup I just wish i had the money cry

Last edited by sbocaj55; Dec 31, 2004 2:18pm.
Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
toysport_celica
toysport_celica
2000 Toyota Celica
Ca

Posts: 52
Joined: August 2004
Thank you.: me, myself, and I...!
Random: a bowl of rice, fried chicken, and a glass of water!
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)