Celica Forums General Discussion Exterior need help from someone who knows our interior

ok for some time now my car has had problems rattling like mad when i use my subs at loud levels from the area around my plate on the rear and the panel in the back seat passenger side, but now i cant even have the volume practically loud enough to hear without my passenger side rear panel rattling like shit and the one on the inside of the hatch, i saw a guide linked ehre a while ago about the places where to put felt squares to prevent rattling but i cant find it again if anyone has instructions on removing those 2 panels or has done it themselves it would be awesome.

searched and searched and found some info i needed in the tsb section now all i need to know is how to Remove the panels, thanks

Dynomat.

k...

I also have a "squiggle" sound...any help would be great

I'll assume you've taken apart interiors before when I give these instructions so if my memory is a lil off you should still get the idea... (mine is in quick release mode so I'm trying to remember the full steps )

1) the little hook on the panel has a tab covering a screw,remove the hook.
2) the rear center piece should just pop off no screws.
3) now the side panel should just pop right out, no screws

Note: can't remember if you have to remove the seat back ( I dont think you do but I always do it so I cant remember lol)
to remove the seat back the easiest way is to fold it down, then fold up the carpet covering and remove the 2 bolts in it. the back should then pull right out and go in the same way just as easy.