Celica Forums General Discussion Exterior Wheels offsets

what is wheel offset??

wheel offset is the amount of distance inside the mounting point of the wheel sis in relation to the backside of the rim. it is measured in millimeters. so higher number the wheels will stick in, lower number they will stick out

The offset of a wheel is what locates the tire and wheel assembly in relation to the suspension. More specifically, it is the measured distance between the hub mounting surface and the center line of the rim. Below is an explanation of the various types of offsets which are pictured in the above graphic.

Positive Offset
A positive offset occurs when the hub mounting surface is on the street side (the side you see) of the center line of the rim. Most factory rims will have this type of offset.

Zero Offset
When the hub mounting surface is centered within the rim, it is known as a zero offset.

Negative Offset
If the hub mounting surface is on the brake side of the center line of the rim, it is considered a negative offset or deep dish.

Note that extensive negative offset can potentially cause increased steering wheel kick-back and place additional stresses on the vehicle's entire suspension.


There you go ... Topic Closed