It depends on your skill level. It appears to be a somewhat simple install. You just need to have an understanding on how to build a sealed enclosure for the sub, then the rest is cut and fit to the car as you go. You could use some cardboard taped together to make a template of the whole back of the car, then transfer it to wood and cut it out. Then make the cutout for the sub with the enclosure beneath. You are gonna have to make some supports to hold up the "second floor" that you have made and then mount your amp to it. drill holes thru the floor for running wires thru. If you just plan ahead maeasure twice and cut once you can do it. It's not rocket science. good luck!!