Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

#246032 Aug 11, 11:50am
Joined: Jun 2004
Posts: 1,283
Specialist
2001 Toyota Celica GT
Specialist
2001 Toyota Celica GT
Joined: Jun 2004
Posts: 1,283
N/A my GT and get into the low 13s? I know this is probably very easy for a GTS. I will have $3600 soon, but if I were to get a Turbo, I wouldn't be able to build up the engine.


My car is gunna be 10x faster than yours...haha... I'm gunna buy like 10
of those speedchips! I figure if 1 gets me 20hp then 10 will get me 200hp!

Joined: Aug 2003
Posts: 2,269
Specialist
2004 Dodge SRT4
Specialist
2004 Dodge SRT4
Joined: Aug 2003
Posts: 2,269
it would not be easy. if you want to go NA start off by getting the 11:1 pistons from MWR, PFC, and i/h/p/e lots of weight reduction and drag radials. that right there will not put you close to low 13's though


was....5speed with i/h/e
15.41 @ 89.30mph 2.282 60'

is....04 srt4 stock
13.936 100.15mph 2.177 60'

NorwayGT #246034 Aug 11, 12:17pm
Joined: Jun 2004
Posts: 1,283
Specialist
2001 Toyota Celica GT
Specialist
2001 Toyota Celica GT
Joined: Jun 2004
Posts: 1,283
Well, I was thinking about boring to 2.0 and getting the 11:1 pistons. Also, I'd get I/H/E but what is the P? The PFC is a definant.


My car is gunna be 10x faster than yours...haha... I'm gunna buy like 10
of those speedchips! I figure if 1 gets me 20hp then 10 will get me 200hp!

Joined: Oct 2002
Posts: 1,233
black & blue 4 you
2000 Toyota Celica GT
black & blue 4 you
2000 Toyota Celica GT
Joined: Oct 2002
Posts: 1,233
p stands for pullies thumbsup


[Linked Image]
i've been changing but you'll never see me now
now i'm blaming you for everything

EuRoBoYGT #246036 Aug 11, 12:22pm
Joined: Jun 2004
Posts: 1,283
Specialist
2001 Toyota Celica GT
Specialist
2001 Toyota Celica GT
Joined: Jun 2004
Posts: 1,283
Originally Posted by EuRoBoYGT
p stands for pullies thumbsup

Thanks. I was planning on getting unorthodox pullies.


My car is gunna be 10x faster than yours...haha... I'm gunna buy like 10
of those speedchips! I figure if 1 gets me 20hp then 10 will get me 200hp!

Joined: Jan 2004
Posts: 5,125
Speed Omen
2002 Toyota Celica GT
Speed Omen
2002 Toyota Celica GT
Joined: Jan 2004
Posts: 5,125
Originally Posted by CelicaGTizzle
N/A my GT and get into the low 13s? I know this is probably very easy for a GTS. I will have $3600 soon, but if I were to get a Turbo, I wouldn't be able to build up the engine.

why not?

- you could still upgrade internals, bore it out, decrease compression, etc

Sultan #246038 Aug 11, 12:34pm
Joined: Jun 2004
Posts: 1,283
Specialist
2001 Toyota Celica GT
Specialist
2001 Toyota Celica GT
Joined: Jun 2004
Posts: 1,283
Originally Posted by Sultan
Originally Posted by CelicaGTizzle
N/A my GT and get into the low 13s? I know this is probably very easy for a GTS. I will have $3600 soon, but if I were to get a Turbo, I wouldn't be able to build up the engine.

why not?

- you could still upgrade internals, bore it out, decrease compression, etc

I won't have enough money to do all that along with the Turbo.


My car is gunna be 10x faster than yours...haha... I'm gunna buy like 10
of those speedchips! I figure if 1 gets me 20hp then 10 will get me 200hp!

Anonymous
Unregistered
Anonymous
Unregistered
You couldnt do it as quickly but if you kept putting aside money for your car you could keep working and upgrading it.

Joined: Jan 2004
Posts: 5,125
Speed Omen
2002 Toyota Celica GT
Speed Omen
2002 Toyota Celica GT
Joined: Jan 2004
Posts: 5,125
ah, I see... then head over to MWR and get the following:

- big bore kit @ 11.0:1 compression ratio (Wiseco pistons included)
- crower rods
- valves
- valve springs
- ARP studs for exhaust manifold, cylinder head, and mains

you could do without the last three if you're going N/A but they couldn't hurt. Match these with a PowerFC and the standard bolt-ons and you could see 13's

Joined: Jan 2004
Posts: 5,125
Speed Omen
2002 Toyota Celica GT
Speed Omen
2002 Toyota Celica GT
Joined: Jan 2004
Posts: 5,125
Originally Posted by CelicaGTizzle
Originally Posted by EuRoBoYGT
p stands for pullies thumbsup

Thanks. I was planning on getting unorthodox pullies.

also, be careful with unorthodox - properly installed, they give pretty good gains over AEM but I'd stick to the latter considering all the horror stories I've heard...

#246042 Aug 11, 12:49pm
Joined: Jan 2004
Posts: 2,371
SHO - NUFF
2003 Toyota Celica GT
SHO - NUFF
2003 Toyota Celica GT
Joined: Jan 2004
Posts: 2,371
I have the wiseco 11:1 internals, crower rods, MWR valves, and valve springs, EIP tuning headgasket, an AEM CAI, and magnaflow exhaust...its much faster than a stock N/A GT, but its not a low 13 sec car...I've never drag raced, but have been in 13 sec cars (low 13's, high 12's), and my car ain't it rolleyes rolleyes...if you want to get there, you'll need to be bored, with the higher comp internals, and apexi pfc, fidanza flywheel (lightest out right now), I/E/H...no pullies (high rpms...the unorthodox pullies don't make enough difference, but will shake your bearings to crap because of engine speed, and the mechanic probably not doing things super perfect on the install), and the high duration cams from cat-cams (JRPonline.com is the distributor...but they are expensive as all hell)...take the 3600, and get the stafford fabrications Turbo...you'll be fast as hell, and still have a reliable engine, and I guarantee you'll be addicted to the Turbo once it on your car thumbsup thumbsup

AZZKIKR #246043 Aug 11, 12:55pm
Joined: Jan 2004
Posts: 2,371
SHO - NUFF
2003 Toyota Celica GT
SHO - NUFF
2003 Toyota Celica GT
Joined: Jan 2004
Posts: 2,371
and sultan...yeah he does want the ARP hardware...you should also head over to EIP tuning, and get a standard compression copper headgasket...properly built N/A's are built to be revved and beaten on...I built mine to beat on, and not have to worry about decreased engine life

AZZKIKR #246044 Aug 11, 1:06pm
Joined: Jan 2004
Posts: 5,125
Speed Omen
2002 Toyota Celica GT
Speed Omen
2002 Toyota Celica GT
Joined: Jan 2004
Posts: 5,125
Originally Posted by AZZKIKR
and sultan...yeah he does want the ARP hardware...you should also head over to EIP tuning, and get a standard compression copper headgasket...properly built N/A's are built to be revved and beaten on...I built mine to beat on, and not have to worry about decreased engine life

...you've just mentioned another reason to stay N/A and build up internals instead of going Turbo - greater engine durability and less maintenance - thumbsup

- also, not sure if you've read about it, but I heard that the EIP headgasket actually blew faster than stock on a stage2 c2gas Turbo kit during tuning - idunno

Sultan #246045 Aug 11, 1:15pm
Joined: Jan 2004
Posts: 2,371
SHO - NUFF
2003 Toyota Celica GT
SHO - NUFF
2003 Toyota Celica GT
Joined: Jan 2004
Posts: 2,371
hrmmmm...that's interesting...good looking out thumbsup thumbsup...I'll have to read up on that...I've not had any hiccups with my engine at all (which is nice)...I don't run boost either tho...who knows...I just wanted to be able to beat on it and still get 200,000 miles out of it before I had to replace the engine or rebuild again. Also, like you said...NA is a lot less maintenance, and a whole lot less machinery to go wrong...I'll read up and check into the head gasket thing here soon, and if you're right then I'll go back to stock when I switch the cams in about 9 months...I'm also eyeballing an oil cooler...can't be too careful

AZZKIKR #246046 Aug 11, 1:18pm
Joined: Jan 2004
Posts: 5,125
Speed Omen
2002 Toyota Celica GT
Speed Omen
2002 Toyota Celica GT
Joined: Jan 2004
Posts: 5,125
^^^
awesome bro - have you considered a Zex wet kit? It's instant speed and very reliable with a window switch - although some don't like the stigma involved in its use...

Sultan #246047 Aug 11, 1:21pm
Joined: Jun 2004
Posts: 1,283
Specialist
2001 Toyota Celica GT
Specialist
2001 Toyota Celica GT
Joined: Jun 2004
Posts: 1,283
I always thought that to N/A was very hard on the engine? I knew it was less maintenance, but what times (1/4) would I expect to see if I got the SF kit and ran it at 6 psi?


My car is gunna be 10x faster than yours...haha... I'm gunna buy like 10
of those speedchips! I figure if 1 gets me 20hp then 10 will get me 200hp!

Sultan #246048 Aug 11, 1:21pm
Joined: Jan 2004
Posts: 2,371
SHO - NUFF
2003 Toyota Celica GT
SHO - NUFF
2003 Toyota Celica GT
Joined: Jan 2004
Posts: 2,371
nah, no juice for me...I got in trouble with my last ride...N/A all the way for me...part of the reason I went with the higher compression is to make sure I stayed away from it

Joined: Jan 2004
Posts: 2,371
SHO - NUFF
2003 Toyota Celica GT
SHO - NUFF
2003 Toyota Celica GT
Joined: Jan 2004
Posts: 2,371
Originally Posted by CelicaGTizzle
I always thought that to N/A was very hard on the engine? I knew it was less maintenance, but what times (1/4) would I expect to see if I got the SF kit and ran it at 6 psi?
...Naturally Aspirated is how the engine comes from the factory (no boost)...when you add Turbo to an engine you also add heat (more power means more heat), and more pressure inside the cylinder walls...REvving high all the time on an engine that isn't built for it while being N/a just wears the crap out of the pistons, and valvetrain...and you have a higher possibility of mis-shifting, and blowing the thing all to hell...while being Turbo is even worse...all that boost puts pressure on the cylinder walls, and if you boost too much, you can wind out your tranny, spin a rod bearing or throw a piston through the bottom of your oil pan...plus it cooks oil more, you have to worry about fuel pressure, air fuel ratio, ignition timing and all sorts of other crap...I'd juts rather not worry about it, and just drive

Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
toysport_celica
toysport_celica
2000 Toyota Celica
Ca

Posts: 52
Joined: August 2004
Thank you.: me, myself, and I...!
Random: a bowl of rice, fried chicken, and a glass of water!
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)