Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

#245215 Aug 10, 3:29pm
Joined: Mar 2004
Posts: 234
Member
2004 Toyota Celica GT
Member
2004 Toyota Celica GT
Joined: Mar 2004
Posts: 234
I wonder what short shift for? Is it make you shift easier? Would it looks after install it? Because it's going to be short.

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
It makes the shifts shorter, meaning faster. It also makes the height shorter, and depending on which brand you go with, a lot shorter.

But keep in mind that the shorter the throw, the harder it will be to shift into the correct gear, so if you aren't already a pro at shifting, then go with a SS kit that doesn't have too short of a throw.

I went with TRD.


Aqua Teen Hunger Force...number one in the hood, G

Joined: Oct 2003
Posts: 1,226
Specialist
Specialist
Joined: Oct 2003
Posts: 1,226
slidr, what about just changing out the housing bushings and the cable bushings on stock? How will that fair against a SS, pro's and con's if any?

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
It may make your shifts more firm, because the stock bushings are kinda spongy. As for making the throws shorter, it won't. Even sawing down the shifter won't make the throws shorter.

The beauty of a short shifter is that it changes the position of the fulcrum, or fixed pivot point. When the fulcrum is moved closer to the resistance (the shift cables), and further away from the effort (your hand, or the shifter), it will make your throws shorter. When the Fulcrum is closer to the Effort than to the Resistance, there is a Loss in Force but a Gain in Speed and Distance.

So unless you change the fulcrum point, you aren't changing the effort or the distance of the throw.
1870166902-pic13.jpg


Aqua Teen Hunger Force...number one in the hood, G

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
See how the TRD shifter on the left moves the fulcrum down away from the effort, and closer to the resistance? It also makes the shifter itself shorter.


I assume that I also made a few mistakes in explaining the principles above, since it was all off the top of my head, and the last science class I took explaining this was like 5 years ago, so correct me if I'm wrong.


Aqua Teen Hunger Force...number one in the hood, G

Joined: Jun 2004
Posts: 1,694
Metal Storm 2040
2000 Toyota Celica
Metal Storm 2040
2000 Toyota Celica
Joined: Jun 2004
Posts: 1,694
^^ that was a very good explanation slidr thumbsup

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
Originally Posted by Polykarb
^^ that was a very good explanation slidr thumbsup
Thanks.

I was waiting for someone to correct me on my physics.

rofl

Still waiting... happywink


Aqua Teen Hunger Force...number one in the hood, G

Joined: Oct 2003
Posts: 1,226
Specialist
Specialist
Joined: Oct 2003
Posts: 1,226
You're pretty much right on, but is the SS worth those short throws? Would a shorter throw actually decrease shifting time? Would it be harmfull to the tranny in any way? I believe there has to be a draw back to the SS otherwise Toyota would've included it on the Celica and other cars. Figure it...Replace a longer lever w/a shorter one, money in the pocket for Toyota on costs alone. Replace rubber with polyurethane, money in Toyota's pocket (I don't need to get into that). Quicker selection of gears, money in the pocket of Toyota for marketing. I could slam may stock shifter and work the clutch to land in lift ever gear and spin the tires up till 3rd. I'm also asking would a stock shifter and bushings be more precise and more effortless than a SS? You helped a lot already. More on your part or any one else would be great.

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
Originally Posted by hephaestus
You're pretty much right on, but is the SS worth those short throws? Would a shorter throw actually decrease shifting time? Would it be harmfull to the tranny in any way? I believe there has to be a draw back to the SS otherwise Toyota would've included it on the Celica and other cars. Figure it...Replace a longer lever w/a shorter one, money in the pocket for Toyota on costs alone. Replace rubber with polyurethane, money in Toyota's pocket (I don't need to get into that). Quicker selection of gears, money in the pocket of Toyota for marketing. I could slam may stock shifter and work the clutch to land in lift ever gear and spin the tires up till 3rd. I'm also asking would a stock shifter and bushings be more precise and more effortless than a SS? You helped a lot already. More on your part or any one else would be great.
Actually, the stock shifter in the Celica has a "shorter" throw compared to most other manual cars.

And there are a few drawbacks that come with having a SS.

One is, shifting becomes more crisp, and more vibration can be felt in the shifter. This is a drawback for some people, but I could care less.

Also, since the throws are shorter and quicker, there is a greater chance that you could select the wrong gear. This might be the reason that most car companies don't install them stock, because people may blame a blown engine on a SS that they may not have wanted in the first place. That's just a theory though.

Also, I remember reading that assloads of people with 2000 Celicas and other years with the close shift gates started blowing their engines and messing up their trannys due to the fact that they were mis-shifting from 5th to 2nd. And it just wasn't a few people. Hundreds and hundreds. You pretty much have to be retarded to try and go from 5th to 4th, and hit 2nd by mistake. I mean, 4th is straight down, and 2nd is over and down. I don't see how people could do this, but who knows. That's one of the reasons they revamped the shift gates. Adding a short shifter to the equation would just increase the number of mis-shifts.

I have a 2000 with close gates and a short shifter, and have never mis-shifted like that before. I have on occasion accidentally gone from neutral to 3rd while trying to hit 1st, but that was only because I learned to drive a stick on the Celica. Now, the shift gates seem wider than ever.


Aqua Teen Hunger Force...number one in the hood, G

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
Oh, and another thing I noticed when I installed my TRD SS that I wasn't expecting to was that it angled the shifts closer to me, the driver. Kinda slanted the gates making it easier.


Aqua Teen Hunger Force...number one in the hood, G

slidr #245225 Aug 10, 10:48pm
Joined: Dec 2003
Posts: 22
Member
2002 Toyota Celica
Member
2002 Toyota Celica
Joined: Dec 2003
Posts: 22
It's really easy for someone with a short shifter to go from 5th to second and skip 4th. GTS's are six speeds. From fifth fourth is over and down, and second is further over and down. Fourth isn't just down. people have been pushing too far left with the SS.

Joined: Sep 2003
Posts: 3,070
Specialist
2000 Toyota Celica
Specialist
2000 Toyota Celica
Joined: Sep 2003
Posts: 3,070
Generally when people downshift, they pass through neutral, thereby making it straight down.


Aqua Teen Hunger Force...number one in the hood, G
Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
toysport_celica
toysport_celica
2000 Toyota Celica
Ca

Posts: 52
Joined: August 2004
Thank you.: me, myself, and I...!
Random: a bowl of rice, fried chicken, and a glass of water!
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)