TRDGTS...did you use the application fluid that it mentions in the instructions? did you use a hairdryer? how long did you let them sit for? i'm about ready to install mine so whatever help you can give that would be awesome
I did not use the fluid like they said to. I cut them into strips like it said and but out each letter of celica individually. I then just heated the surface of the doorsill up, took the paper back off one of the overlays, press it on in a corner you like and just got some of the paper top off to expose the vinyl. Just lined it up after that while holding the vinyl where i wanted it with my left hand and peeling the top off with my right while keeping it aligned. I put a couple on, then heated them up a tad and pressed down on them. When I was done, it said to let it sit for 12 or more hours so that's what I did and they came out good. After you heat them, they will move a bit but that helps your position it, then just leave it alone and don't touch it and it will dry up good there and stay on.