Previous Thread
Next Thread
New Reply
Print Thread
Joined: Sep 2003
Posts: 3,077
slidr
Specialist
slidr

Specialist
2000 Toyota Celica

Joined: Sep 2003
Posts: 3,077
Saint Louis, MO
Apr 15, 6:41pm - #155933 
Torque Specifications?

Just wondering if there is a list of various ft/lb. measurements for certain bolts throughout the Celica.

I've found the torque specification for the lug nuts, but have had no luck finding torque specifications for any other bolts on the Celica's engine, tranny, etc.


Even a generic list would be helpful. I'm sure there is a list floating around out there somewhere. Specifications for odd items such as oil filters, the pulley bolt, transmission casing bolts, etc.

Am I being a pussy by asking for something like this, or should I just torque everything down with my impact wrench that puts out 150 ft/lbs. of torque. I know that the wheel lugs only need 70 something, so I was just wondering if a little overkill would be disasterous to some of the parts on the car. My girlfriend's dad and I replaced the clutch and used the same impact wrench for everything from the wheel lugs to the tranny casing bolts. Just wondering if that would be okay.

Thanks.


Aqua Teen Hunger Force...number one in the hood, G
Joined: Jan 2004
Posts: 1,612
eric_h
2low2slow
eric_h

2low2slow
2002 Toyota Celica GT

Joined: Jan 2004
Posts: 1,612
St.George, UT
Apr 15, 6:47pm - #155934 
lugs are 50-100 i heard, idk but you dont wanna use too much torque on some of the other stuff, it can strip bolts or crush some parts frown


[Linked Image]
A boats a boat, but the mystery box could be anything....Even a boat!
Joined: Jan 2004
Posts: 1,248
Rocketman
Specialist
Rocketman

Specialist
01 Toyota Celica

Joined: Jan 2004
Posts: 1,248
Idaho Falls, ID
Apr 15, 6:57pm - #155935 
If all else fails...turn till tight then an extra 1/4 turn! thumbsup

Joined: Sep 2003
Posts: 3,077
slidr
Specialist
slidr

Specialist
2000 Toyota Celica

Joined: Sep 2003
Posts: 3,077
Saint Louis, MO
Apr 15, 7:07pm - #155936 
Originally Posted by Rocketman
If all else fails...turn till tight then an extra 1/4 turn! thumbsup
Well it's an impact wrench, so when the screw/bolt is turned as much as it can be turned, it makes a hammering sound.


Aqua Teen Hunger Force...number one in the hood, G
Join the conversation - Register Now or Log In to add your comment


Moderated by  isaac 

Member Spotlight
ThuGGyBuNNy
ThuGGyBuNNy
2003 Toyota Celica
WA

Posts: 29
Joined: February 2005
Show All Member Profiles 
Shout Box
Recent Topics
TradingGTS for GT what should I know.
by GTS25430. 04/24/2017 5:19 PM
Does 01' corolla struts swap in an 01' celica GT?
by Frostysnowman92. 04/24/2017 1:22 PM
WTB: 00-02 amp bypass harness
by MJ00GTS. 04/18/2017 7:36 PM
Does not seem to be much activity for the 5th gens???
by Coop301. 04/18/2017 7:51 AM
Cold wet weather hesitation
by GTS25430. 04/17/2017 6:15 AM
00-02 premium 8spkr 2din gps solutions?
by MJ00GTS. 04/17/2017 2:24 AM
WTB: valve assy, vacuum switch
by hydraea. 04/15/2017 5:32 PM
500awhp project
by Salman. 04/14/2017 8:20 AM
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2017
Powered by UBB.threads™ PHP Forum Software 7.6.1
(Snapshot build 20170416)