Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

#14439 May 1, 9:43pm
Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
Ok i have the following mods but which aftermarket products can give me more torque ? confused

Joined: Dec 2002
Posts: 1,660
ECelica Staff
2001 Toyota Celica
ECelica Staff
2001 Toyota Celica
Joined: Dec 2002
Posts: 1,660
Nitrous. A lighter flywheel may help with acceleration.

Joined: Apr 2003
Posts: 183
Member
Member
Joined: Apr 2003
Posts: 183
where on the band do you want the torque?

FX-MAN #14442 May 1, 10:07pm
Joined: Apr 2003
Posts: 183
Member
Member
Joined: Apr 2003
Posts: 183
Dan's right... Flywheel would be the next thing I think if you want to stay with NA.. with all those mods though, you coulda had a turbo by now.. If you have $4K I would turbo. Dave Draper makes a kickass GT kit starting with the turbo designed for the 1.8 liter Audie A4 Quattro and custom injen piping, he is taking orders in 2 weeks, the kit will arrive 1 month after that (you will lose your header and your intake, but you will end up with 200whp). If you don't have the $ for a turbo though, I would get a flywheel next, or cosider a port and pollish job (although make sure you go somewhere good because you don't wanna screw that up).

FX-MAN #14443 May 1, 11:26pm
Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
thanks wave cheers

Joined: Apr 2003
Posts: 183
Member
Member
Joined: Apr 2003
Posts: 183
you have the AEM underdrive pulley and a system.. how do you not fry your battery all the time????

FX-MAN #14445 May 2, 12:37am
Joined: Nov 2002
Posts: 18
Member
Member
Joined: Nov 2002
Posts: 18
you got the wrong car for torque. Best bet would be Forced Induction(aka turbo or Custom Supercharger)

Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
Quote
Originally posted by FX-MAN:
you have the AEM underdrive pulley and a system.. how do you not fry your battery all the time????
well my battery has died like 4 times rofl , but thats because my car was turned off of ignition thumbsdown , but other then taht its cool thumbsup grin

Joined: Oct 2002
Posts: 2,667
ECelica Staff
ECelica Staff
Joined: Oct 2002
Posts: 2,667
fly wheel ... get a fly wheel thumbsup

Joined: Mar 2003
Posts: 7
New Member
New Member
Joined: Mar 2003
Posts: 7
well the first thing you did wrong, that most of us did was the CAI, this is fine if you want a few HP up high, but i takes a way torque downlow. aside from that im gonna say forced induction and perhaps a valve and lifter kit($300) for good torque gain.
good luck


Drive it like you stole it.

Joined: Nov 2002
Posts: 8
New Member
New Member
Joined: Nov 2002
Posts: 8
Quote
Originally posted by Night_Riders:
well the first thing you did wrong, that most of us did was the CAI, this is fine if you want a few HP up high, but i takes a way torque downlow. aside from that im gonna say forced induction and perhaps a valve and lifter kit($300) for good torque gain.
good luck
Just wondering where i could lay my hands on the lifter kit mentioned?

Joined: Dec 2002
Posts: 105
Member
2002 Celica GT
Member
2002 Celica GT
Joined: Dec 2002
Posts: 105
Quote
Originally posted by Night_Riders:
well the first thing you did wrong, that most of us did was the CAI, this is fine if you want a few HP up high, but i takes a way torque downlow.
just how much torque do you lose? I have read lots of reviews and have decided on an injen cai. I have a 2002 gt, is there really that much torque lost? is it all across the band?

[ 05-03-2003, 12:40 PM: Message edited by: 7th_gen_celica ]

Joined: Apr 2003
Posts: 183
Member
Member
Joined: Apr 2003
Posts: 183
you don't lose any.. I have seen actual dyno, the only place an AEM even MATCHES stock torque on the powerband is around 2000RPM and it's brief like only between 2000 and 2100. Everywhere else it's higher.. not sure what he is talking about, I have one and I know I got low end gains in torque not a loss.

Actually the Dyno on the AEM site is closer than people say it is (it really did look like that on my buddy's car).. it's all hype from guys who blew their wads on short rams.

The whole idea of a CAI causing a torque loss is rediculous, cold air has higher volume (that's why warm air rises), more air, more ignition.. end of discussion.

[ 05-03-2003, 10:11 PM: Message edited by: FX-MAN ]

FX-MAN #14452 May 3, 10:13pm
Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
Quote
Originally posted by Night_Riders:
well the first thing you did wrong, that most of us did was the CAI, this is fine if you want a few HP up high, but i takes a way torque downlow. aside from that im gonna say forced induction and perhaps a valve and lifter kit($300) for good torque gain.
good luck
actually... i tried using AEM CAI, bt it doesnt fit it kept on hitting the tranny thumbsdown wtf puke . i own an auto... and the AEM CAI only works for stick thumbsdown ...

thumbsup
also the flywheel was mentioned... what is that ?

the nos and stuff... <img src=" title="" src="graemlins/bs.gif" /> thumbsdown i only want motor, NOS is just like cheat stuff... it reminds me of Fast and Furious... <img src=" title="" src="graemlins/bs.gif" /> if i was going to get NOS i might as well applied for the movie then wave rofl no offense to people who has nos though.. i still have respect for you guys wave wink

Joined: Apr 2003
Posts: 183
Member
Member
Joined: Apr 2003
Posts: 183
Don't they make a different CAI for the Auto? not sure, I have a 5sp but I am pretty sure some of the team celica guys up here have CAI with an auto trans. Not sure, I'll ask around.

Flywheel is sort of but not really a clutch component, it goes between your crank and your clutch pressure plate, if you lighten it, it unlocks some torque that is lost between the engine and the wheels since the crank doesn't have to spin so much weight to turn your gears. It's not adding any more power to your engine, just getting more onto the road. (they say every lb is about 2.5lb -ft of torque across the band, so it's expensive but worth it if you lighten it allot, and can really help with acceleration) It's an expensive install since you have to remove the trans axle the exhaust and the clutch to get at the flywheel (so it's a good time to replace the clutch too, since you have to put the clutch back together anyway a new clutch install will not cost you any labor, if your clutch is more than 2 years old and you can afford a new one I would do the clutch at the same time). A good mechanic will charge about 4 hours of labor.

I am thinking about the fidanza flywheel, but I need to find the weight of the stock flywheel to figure out if the gains are worth the money.. (the install is as expensive as the flywheel itself).

[ 05-03-2003, 10:35 PM: Message edited by: FX-MAN ]

#14456 May 4, 9:15am
Joined: Dec 2002
Posts: 1,660
ECelica Staff
2001 Toyota Celica
ECelica Staff
2001 Toyota Celica
Joined: Dec 2002
Posts: 1,660
You wouldn't be N/A with nitrous. But if you do want to stay in N/A, I reccommend the flywheel. I have never heard of a lifter kit for our cars, if there is ones out, you would be one of the first, if not THE first to have this. I don't know if port and polish will help out with torque. You could look into some serious engine work, like bore the cylinders, replace pistons, rods, etc etc.

Joined: Dec 2002
Posts: 1,660
ECelica Staff
2001 Toyota Celica
ECelica Staff
2001 Toyota Celica
Joined: Dec 2002
Posts: 1,660
Also, how about that motor mount that is going around on NC.org. I'm sure that gives a little low end. Not much, but it all adds up.

Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
Quote
Originally posted by thor:
get a flywheel, anyway the bullshit about AEM CAI causing a loss in low-end torque is wrong, just short-ramers wishing they had cai. I would get turbo...why did you get a auto anyway if you are SO concerned about being racey, do you know how to drive a stick? spineyes
i got an auto because my parent gave it to me for my graduation... thumbsup ... i dont want to be racey but i just need more torque becaue of my 2 12's that are weighing me dow wave grin n and my wing... that have thing thumbsdown even though it carbonfiber... err !!

so yeah i guess but trying 2 find the parts about flywheel might be difficult... and ill check in the motor mount also thanks Grand-Touring-Dan wave

if anyone finds anything please post... thanks ! wave thumbsup grin

Joined: Feb 2003
Posts: 67
Member
Member
Joined: Feb 2003
Posts: 67
try going to www.suprastore.com [suprastore.com] they sell celica flywheels and clutches.


GT300 body kit on, getting fitted, doing install myself.
pics comin as soon as my kit is here and painted...

jeremy #14460 May 5, 11:14am
Anonymous
Unregistered
Anonymous
Unregistered
or...go to www.nopionline.com [nopionline.com] they have a flywheel and clutch there...

#14461 May 12, 7:57am
Joined: Sep 2002
Posts: 26
Member
Member
Joined: Sep 2002
Posts: 26
Hey man do not be too disapointed with the auto if you decide to go to a strip car. I have notice over time that the automatics do a lot better in the 1/4 mile (consistantly) simply because you can not miss shifts and things of that nature. So any time someone gives you crap about having one just take them out to the strip and show them a thing or two. Once again just my two cents thumbsup

Joined: Apr 2003
Posts: 23
Member
Member
Joined: Apr 2003
Posts: 23
hmp... okay you guys you all got to forgive my ignorance but why does torque have to be important?

what does torque do for cars?

Joined: Feb 2003
Posts: 271
Member
Member
Joined: Feb 2003
Posts: 271
torque help you pull, or bring your car up to speed so like at a launch or better pick up... thats why most american cars have good starts cry [Mad] , because they have good pick up but bad high end... thumbsup wave

i think... but correct me if im wrong

dea7hr0w #14464 May 13, 12:19am
Joined: Apr 2003
Posts: 23
Member
Member
Joined: Apr 2003
Posts: 23
so correct me if im wrong..

torque is qhat gets you off like how fast you go from a static position. if this is so cellica's start slow but catches up later on?

Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
nebraskaGTS
nebraskaGTS
2000 Toyota Celica
Nebraska

Posts: 451
Joined: December 2003
Random: John stop humping my car.
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)