some ass decided to deface my fender, luckily they didnt know what they were doing and didnt go deep enough or get my door (kinda wish they woulda got the hood so i can replace it with Carbon Fiber,) but anyways im pissed but im assured it will buff out with some rubbing compound. didnt even notice it until i turned on my garage lights then theres 3 quick strikes.its a small town so no doubt whoever did it will slip up then theyll be sorry.
A boats a boat, but the mystery box could be anything....Even a boat!
some ass decided to deface my fender, luckily they didnt know what they were doing and didnt go deep enough or get my door (kinda wish they woulda got the hood so i can replace it with Carbon Fiber,) but anyways im pissed but im assured it will buff out with some rubbing compound. didnt even notice it until i turned on my garage lights then theres 3 quick strikes.its a small town so no doubt whoever did it will slip up then theyll be sorry.
i know how you feel man, i got mines keyed at school and i cant get the scratch out
lol you wish ur hood would've been keyed...lol my ferind wishes it'd hail so he could get a new Carbon Fiber hood, but he blwe his engine like a moron.
some ass decided to deface my fender, luckily they didnt know what they were doing and didnt go deep enough or get my door (kinda wish they woulda got the hood so i can replace it with Carbon Fiber,) but anyways im pissed but im assured it will buff out with some rubbing compound. didnt even notice it until i turned on my garage lights then theres 3 quick strikes.its a small town so no doubt whoever did it will slip up then theyll be sorry.
i know how you feel man, i got mines keyed at school and i cant get the scratch out
theres some stupid ass people isnt there
A boats a boat, but the mystery box could be anything....Even a boat!
some ass decided to deface my fender, luckily they didnt know what they were doing and didnt go deep enough or get my door (kinda wish they woulda got the hood so i can replace it with Carbon Fiber,) but anyways im pissed but im assured it will buff out with some rubbing compound. didnt even notice it until i turned on my garage lights then theres 3 quick strikes.its a small town so no doubt whoever did it will slip up then theyll be sorry.
i know how you feel man, i got mines keyed at school and i cant get the scratch out
theres some stupid ass people isnt there
I know how you feel. Mine got keyed while I was showing it AT A CAR SHOW!! I detailed it before show--perfect. It rained on the way home, the next morning I washed it and found it, so it had o be at the show. They hit it hard enough to put a little dent too, right on the passenger side rearquarter. Scratch and dent. I could commit murder for that
Kill them, kill them all and the key their car...seriously
"You're not how much money you have in the bank. You're not the car you drive. You're not the contents of your wallet. You're not your f------ khakis. You're the all-singing, all-dancing crap of the world."
Kill them, kill them all and the key their car...seriously
seriously their gonna wish it never happened, see how they do with out a fucking windshield, and a warning signed keyed in their cars"warning: may key your car".pretty elaborate but what gives anyone the right
A boats a boat, but the mystery box could be anything....Even a boat!
you should rip the engines apart and then key the words "Fuck off, you reap what you sow...fuckers!"
"You're not how much money you have in the bank. You're not the car you drive. You're not the contents of your wallet. You're not your f------ khakis. You're the all-singing, all-dancing crap of the world."
I was raised not to screw with someones Family, Dog, or car...no matter what. I would seriously wax somebody if I caught them screwing with my car.
I was raised the same way. I hate hearing these stories because it just shows how many assholes are out there. One thing I got so pissed at was, (you might remember the show greg). Last summer, there was a car show at a local Giant Eagle. There were SWEET old school muscle cars, along with some sweet modern domestics and imports. Everyone actually seemed to be getting along...domestics and imports talking among each other...giving tips...etc. Not a typical 'jap crap sucks' from them. Anyways, just before it started getting dark out, around 4 cars were keyd. I believe a 70's camaro, and vette. A Mustang GT, and an eclipse and talon were also scratched. It had to suck big time for them. I felt really bad...you pay how many thousands of dollars on a car...then so many thousands modding it, and some assmonkey comes along and within 2 minutes causes a lot of $$$$ in damages.
people need to keep their jealousy to themselves, so what now that you did that doesnt mean im gonna sell my car or be afraid, now it only means your gonna burn in hell and quiet possibly get you and your shit fucked by me and a couple close friends
A boats a boat, but the mystery box could be anything....Even a boat!
I was raised not to screw with someones Family, Dog, or car...no matter what. I would seriously wax somebody if I caught them screwing with my car.
I was raised the same way. I hate hearing these stories because it just shows how many assholes are out there. One thing I got so pissed at was, (you might remember the show greg). Last summer, there was a car show at a local Giant Eagle. There were SWEET old school muscle cars, along with some sweet modern domestics and imports. Everyone actually seemed to be getting along...domestics and imports talking among each other...giving tips...etc. Not a typical 'jap crap sucks' from them. Anyways, just before it started getting dark out, around 4 cars were keyd. I believe a 70's camaro, and vette. A Mustang GT, and an eclipse and talon were also scratched. It had to suck big time for them. I felt really bad...you pay how many thousands of dollars on a car...then so many thousands modding it, and some assmonkey comes along and within 2 minutes causes a lot of $$$$ in damages.
That's why you keep an eye on your ride while you're at shows. Shit can get damage/stollen very easily.
you should rip the engines apart and then key the words "Fuck off, you reap what you sow...fuckers!"
Or you could just do the following...a lot 'funner' then ripping the engine apart. - Get a DC converter like the one used on a train set. Cut the connector off, separate the wires, and strip them both.
- Now you need a jar of water with a tablespoon or so of sodium chloride (which is SALT!) added to it. This makes the water conductive.
- Now insert both wires into the mixture (I am assuming you plugged the converter in...) and let them sit for five minutes. One of them will start bubbling more than the other. This is the POSITIVE(+) wire. If you do not do this test right, the final product will be the opposite (chemically) of rust, which is RUST ACID. You have no use for this here (although it IS useful!).
- Anyway, put the nail tied to the positive wire into the jar. Now put the negative wire in the other end. Now let it sit overnight and in the morning scrape the rust off of the nail & repeat until you got a bunch of rust on the bottom of the glass.
- Now remove the excess water and pour the crusty solution onto a cookie sheet. Dry it in the sun for a few hours, or inside overnight. It should be an orange-brown color (although I have seen it in many different colors! Sometimes the color gets fucked up, what can I say... but it is still iron oxide!)
- Crush the rust into a fine powder and heat it in a cast-iron pot until it is red. Now mix the pure iron oxide with pure aluminum filings which can be bought or filed down by hand from an aluminum tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3 grams.
- Thermite requires a LOT of heat (more than a blow torch!) to ignite. However, magnesium ribbon (which is sort of hard to find.. but I have found them at welding shops.) will do the trick. It takes the heat from the burning magnesium to light the thermite.
- Now when you see your victim's car, pour a fifty-cent sized pile onto his hood, stick the ribbon in it, and light the ribbon with the blow torch. Now chuckle as you watch it burn through the hood, the block, the axle, and the pavement. BE CAREFUL! The ideal mixtures can vaporize CARBON STEEL!
REMEMBER FOLKS! EDUCATIONAL PURPOSES ONLY! AND DONT HOLD ME RESPONSIBLE IF YOU COME UP WITH A MISSING FINGER...OR FOUR! DONT TRY THIS AT HOME!
you should rip the engines apart and then key the words "Fuck off, you reap what you sow...fuckers!"
Or you could just do the following...a lot 'funner' then ripping the engine apart. - Get a DC converter like the one used on a train set. Cut the connector off, separate the wires, and strip them both.
- Now you need a jar of water with a tablespoon or so of sodium chloride (which is SALT!) added to it. This makes the water conductive.
- Now insert both wires into the mixture (I am assuming you plugged the converter in...) and let them sit for five minutes. One of them will start bubbling more than the other. This is the POSITIVE(+) wire. If you do not do this test right, the final product will be the opposite (chemically) of rust, which is RUST ACID. You have no use for this here (although it IS useful!).
- Anyway, put the nail tied to the positive wire into the jar. Now put the negative wire in the other end. Now let it sit overnight and in the morning scrape the rust off of the nail & repeat until you got a bunch of rust on the bottom of the glass.
- Now remove the excess water and pour the crusty solution onto a cookie sheet. Dry it in the sun for a few hours, or inside overnight. It should be an orange-brown color (although I have seen it in many different colors! Sometimes the color gets fucked up, what can I say... but it is still iron oxide!)
- Crush the rust into a fine powder and heat it in a cast-iron pot until it is red. Now mix the pure iron oxide with pure aluminum filings which can be bought or filed down by hand from an aluminum tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3 grams.
- Thermite requires a LOT of heat (more than a blow torch!) to ignite. However, magnesium ribbon (which is sort of hard to find.. but I have found them at welding shops.) will do the trick. It takes the heat from the burning magnesium to light the thermite.
- Now when you see your victim's car, pour a fifty-cent sized pile onto his hood, stick the ribbon in it, and light the ribbon with the blow torch. Now chuckle as you watch it burn through the hood, the block, the axle, and the pavement. BE CAREFUL! The ideal mixtures can vaporize CARBON STEEL!
REMEMBER FOLKS! EDUCATIONAL PURPOSES ONLY! AND DONT HOLD ME RESPONSIBLE IF YOU COME UP WITH A MISSING FINGER...OR FOUR! DONT TRY THIS AT HOME!
you should rip the engines apart and then key the words "Fuck off, you reap what you sow...fuckers!"
Or you could just do the following...a lot 'funner' then ripping the engine apart. - Get a DC converter like the one used on a train set. Cut the connector off, separate the wires, and strip them both.
- Now you need a jar of water with a tablespoon or so of sodium chloride (which is SALT!) added to it. This makes the water conductive.
- Now insert both wires into the mixture (I am assuming you plugged the converter in...) and let them sit for five minutes. One of them will start bubbling more than the other. This is the POSITIVE(+) wire. If you do not do this test right, the final product will be the opposite (chemically) of rust, which is RUST ACID. You have no use for this here (although it IS useful!).
- Anyway, put the nail tied to the positive wire into the jar. Now put the negative wire in the other end. Now let it sit overnight and in the morning scrape the rust off of the nail & repeat until you got a bunch of rust on the bottom of the glass.
- Now remove the excess water and pour the crusty solution onto a cookie sheet. Dry it in the sun for a few hours, or inside overnight. It should be an orange-brown color (although I have seen it in many different colors! Sometimes the color gets fucked up, what can I say... but it is still iron oxide!)
- Crush the rust into a fine powder and heat it in a cast-iron pot until it is red. Now mix the pure iron oxide with pure aluminum filings which can be bought or filed down by hand from an aluminum tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3 grams.
- Thermite requires a LOT of heat (more than a blow torch!) to ignite. However, magnesium ribbon (which is sort of hard to find.. but I have found them at welding shops.) will do the trick. It takes the heat from the burning magnesium to light the thermite.
- Now when you see your victim's car, pour a fifty-cent sized pile onto his hood, stick the ribbon in it, and light the ribbon with the blow torch. Now chuckle as you watch it burn through the hood, the block, the axle, and the pavement. BE CAREFUL! The ideal mixtures can vaporize CARBON STEEL!
REMEMBER FOLKS! EDUCATIONAL PURPOSES ONLY! AND DONT HOLD ME RESPONSIBLE IF YOU COME UP WITH A MISSING FINGER...OR FOUR! DONT TRY THIS AT HOME!
That's awesome.
wow thats intense, did you think of all that stuff or hear it from someone
A boats a boat, but the mystery box could be anything....Even a boat!
wow thats intense, did you think of all that stuff or hear it from someone
Well, I got it from a book...but unlike a lot of 'recipe's that dont work very good...this one does. It works great. No, I didnt do it to someones car, I just got some steel and tested it on there. Only thing I have done to change it is, add a bit of silly puddy to the recipe. That way you can 'mold' it around things that are not flat. IE: Padlock, wall, or whatever.
wait till you see what I can do with sugar and potassium nitrate (Salt Peter) in the right mixture...and people think a car full of pot smokers makes a lot of smoke...muhahahaha
next hes gonna tell us how to set a broken bone with dental floss and a styrofoam cup
Actually, all you do is heat the melt some styrofoam in with some hot water and A lot of Epsum salt. Keep mixing in salt until it desolves...and continue doing this around 5 times till it wont dissolve anymore, then mix that mixture in with flour. Step 1 is finished, then you wrap floss around each finger at the knuckles, and once around the wrist, and tie it to something sturdy and pull back. NOTE: THIS CREATES A LOT OF PAIN when it sets back in place! Then, pour the flour/epsun salt mixture onto the arm and let it dry. This will work great if you are laying down with the floss connected to your foot..that way constant even pressure. When the mixture dries, it will turn hard as rock, thus preserving the arm in that position till you are healed.
so..who wants to know how to make a Shoulder Mounted Rocket Launcher by just using a pep boys exhaust, a lot of cabbage and beans, and an electric ignitor from a grill or lighter?
find them. beat their asses. that actually happened to me too while someone was jacking my trd emblem off the rear, and he used a key and scratched it. damn i was pissed.
damn dude...I dont know why the hell someone would ever do somthing like that
best guess was jealousy, but thats no reason to touch other peoples business how about instead you go out and work 40 hours and all your weekends being still a lad and keep good grades to channel all the mischievous energy
A boats a boat, but the mystery box could be anything....Even a boat!
I've had a few key marks on my hood, a line keyed between my rear window and hatch and near the rear wheel-well scratched by someone elses bumper. Stupid people out there.
~* Brotherhood Of Eternal Sleep *~ - Nocturnal Supremacy -
yeah some people are just idiots, the cop(came over to pick up his av cord from our surveliance camera(no it didnt happen at home)) said it looked possibly like something else scratched it like someone dropped a bike on it or something or else it was just a shitty job, either way it wasnt normal
A boats a boat, but the mystery box could be anything....Even a boat!
FUCK man!!!!!!!!!!!! i got fuckin keyed again today at school!!!!!!! SHIT!!!!!!. THis time is was a long ass one. Man im pissed. FUCKIN people just gotta stop haten on peoples car. SHIT.
Thank you.: Blue BatMobile for sponsorship, Isaac for installing strut bar, Easy_C for being a great friend, Sakara for entertainment, DaBigTickett for the laughs. Everyone at Ecelica! You guys rock!
Random: How many emo kids does it take to screw in a lightbulb? None, they just sit in the dark and cry.
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.