Parking Lights are 194/168 WEDGE bulbs (12volt 5watt)
Required tools
None
Installation to both sides is simple and can be completed in about 5 minutes...
photo by DSGB4LYF23
On the passenger's side, give a half twist counter-clockwise. (right-hand-drive is opposite)
On the driver's side, give a half twist clockwise. (right-hand-drive is opposite)
photo by DSGB4LYF23
At this point, the housing simply pulls out. Now you have access to the light bulb - which just pulls out as well.
Replace the bulb with your new lighting.
Re-install is in opposite sequence of directions.
You mentioned nothing about taking the engine cover off to do the passenger side and I can't get the screws/clips out of it for the life of me. I've played with them and a screwdriver for 15 minutes and they won't budge. Any suggestions?
if your meaning the tips on the plastic covers its very easy, you just take a screwdriver (i recommend a phillips) and push into the circle on the top of it. then take a flat head wedge it between the plastic and the lock and force it off.
Who's Online
Member Profiles
Forum Help
Previous topic 
Next topic 
Return to Main User Forums
Return to EXTERIOR Installation Guides Topic List
Printable version of this page
Thread views: 1639